.577/.450 question
I have been paper patching my Martini B/P loads and using Puflon as a filler, with no other wads. The only lube is a smear of bees wax and vasoline at the top of the paper patch.The question is should...
View ArticleRe: .577/.450 question
Using a grease cookie/scrubber or whatever you wish to call it reduces fouling buildup and keeps what does build up softer. It is advisable for shooting more than a few shots regardless of bullet...
View ArticleRe: .577/.450 question
Be very careful with Pufflon. It can and will slug up into a solid mass. I would not recommend much more than 20% load density of Puff-lon and be real reluctant to get in down in the powder chamber of...
View ArticleRe: .577/.450 question
My experience with Pufflon is the same as DDs. I am back to using Kapok.Dennis
View ArticleRe: .577/.450 question
I appreciate your taking the time to share this information with me. After looking at the pictures that you have posted I have concluded that I must have streched the case necks of all my new Jamison...
View ArticleRe: .577/.450 question
While using cases fire formed to your chamber is a good idea for both case life and accuracy, maintaining case OAL is fairly important to avoid crushing them if you use a die with a roll crimp when...
View ArticleRe: .577/.450 question
The first time firing of any case is basicallly fire forming it to you chamber. You should trim to length after first firing.No real damage from one or two firings with the solid powder fillers....
View Article
More Pages to Explore .....